Intelligent Battery 2400mAh(2-Pack) with Bi-Directional Fast Charger for DJI Mini 4K/Mini2/Mini 2 SE/Mini SE - High Capacity Li-ion Batteries with Overheat Protection,31 Mins Flight Time

Highlights

• 【Packing List】2 high-capacity batteries + 1 charger included + 1 type-c cable
• 【Extensive Compatibility】The intelligent flight batteries and the charger is perfectly compatible with DJI Mini 4K,Mini 2,Mini 2 SE,and Mini SE.
• 【Specifications】Battery capacity: 2400mAh,Voltage: 7.7V,Charger input: 5V/3A(Max),Charger USB output: 5V/2A
• 【Multi-Layered Safety Protection】Built-in smart chip provides multiple protection mechanisms: Over-charge / Over-discharge / Over-current / Short-circuit / Over-temperature safeguards. Ensures operational safety and extends battery lifespan.
• 【Fast Charge】The device charges up to three DJI Mini 2 batteries sequentially based on their power levels, starting from the highest to the lowest. Charging times: With QC3.0/5V3A and dual USB-C input, it takes approximately 150 minutes for three batteries (around 50 minutes per battery). With QC3.0/5V3A and single USB-C input, it takes about 240 minutes for three batteries (around 80 minutes per battery).
• 【Charge in Sequence】Three batteries are installed,only one charges at a time. The charger first analyzes all batteries and prioritizes the one with the highest remaining charge,initiating its charging while placing others on standby.Upon full charge of the prioritized battery,the system sequentially selects the next highest-charge battery for charging.This cycle repeats until all batteries reach full capacity
• 【Bi-directional Charge】It functions as a power bank to charge your phone or other devices when batteries are inserted into the charger hub, making it an essential companion for travel, camping, or any outdoor or indoor activity.
• 【Note】(1).Please fully charge the battery before first use. and try 2-3 low-altitude flights before high flights.(2).Placing a dormant battery directly into the Battery Manager will trigger no response from the device—it cannot detect battery levels or initiate charging. The battery must first be awakened by installing it in the drone for charging. Only after this activation can the Battery Manager be used for monitoring.