SNANSHI XLR to 1/4 Cable 6.6ft 2-Pack - Balanced TRS to XLR Male 22 AWG Studio Monitor Cable Color-Coded L/R Channels, Audio Interface or Mixer to Studio Monitor or PA Speaker (Not for Microphone)
We independently review everything we recommend. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more ›
SNANSHI XLR to 1/4 Cable 6.6ft 2-Pack - Balanced TRS to XLR Male 22 AWG Studio Monitor Cable Color-Coded L/R Channels, Audio Interface or Mixer to Studio Monitor or PA Speaker (Not for Microphone)
60 ratings
Highlights
- Important note: This cable has two male plugs (one-quarter inch TRS male and XLR male); it does not connect to microphones, which require an XLR female port; for mic use, search XLR female to male; designed for balanced line-level output to monitor input only
- Heavy-duty 22 AWG conductor: Uses oxygen-free copper for lower resistance and cleaner balanced signal transmission from audio interface to studio monitor; thicker gauge reduces signal loss compared to standard 24 AWG cables
- Compatibility check before buying: Requires a source device with one-quarter inch TRS outputs and a destination device with XLR male inputs; compatible with Focusrite Scarlett 2i2, KRK Rokit, Yamaha HS series, and JBL 305P MkII
- Dual shielding construction: Aluminum foil layer plus ninety-eight point five percent OFC braided copper spiral eliminates EMI and RFI interference; three-conductor balanced design cancels common-mode noise for clean audio in studio, stage, or home recording environments
- Two-pack for complete stereo setup: Each cable carries one mono balanced channel; connect cable one from left interface output to left monitor XLR input and cable two from right output to right monitor; both cables required for full stereo playback
- Color-coded connector rings for easy channel identification: One cable features a black ring and the other a red ring; instantly identify left and right channels without tracing cables behind equipment or rack
- Built for long-term use: Nylon braided jacket and twenty-four karat gold-plated connectors withstand over fifteen thousand bends without loss of flexibility or signal performance; backed by a three-year manufacturer warranty covering defects in materials and workmanship; also available in ten-foot and fifteen-foot lengths
- 3-YEAR WARRANTY AND MORE LENGTHS: 3-year manufacturer warranty covers defects in materials and workmanship; also available in 10ft and 15ft for larger studio rooms or live sound setups needing more reach between mixer, interface, and powered speaker
Description
The Vital Link Between Your Audio Interface and Studio MonitorsBuilding a home recording studio? The connection between your sound source and your speakers is critical. The SNANSHI Balanced 1/4 Inch TRS to XLR Male Cable (2-Pack) is the ultimate TRS to XLR solution, engineered to deliver the true, uncolored sound your music deserves.Why Choose This 1/4 to XLR Male Set? Studio monitors are used in stereo pairs. Our 2-Pack provides a complete 1/4 to XLR cabling solution in one purchase. Whether you call it a quarter inch to xlr adapter or a TRS to XLR cable, this kit ensures you are ready to connect instantly.True Balanced "Noise-Free" Architecture Don't let buzzing ruin your mix. This XLR to 1/4 cable uses a balanced 3-conductor design to cancel out interference. It is far superior to cheap unbalanced cords, providing a dead-silent noise floor for your XLR to TRS connections.Technical SpecificationsCable Type: Balanced Interconnect (1/4 TRS to XLR Male).Connectors: Gold-Plated 6.35mm (1/4 Inch) TRS to 3-Pin XLR Male.Wiring: Tip to Pin 2, Ring to Pin 3, Sleeve to Pin 1.Conductor: Oxygen-Free Copper (OFC).Application: 1/4 to XLR male connection for speakers and mixers.Universal Compatibility Designed for "Output to Input" connections:Source (1/4" Output): Audio Interfaces, DJ Controllers, Mixers.Destination (XLR Input): Powered Studio Monitors, PA Speakers.Function: Works perfectly as a male xlr to 1/4 balanced patch cord.⚠️ CRITICAL BUYING GUIDE1. NOT for Microphones: This is a Male to Male cable. Microphones require an XLR Female connector.2. Direction: Ideally used as 1/4 to XLR (Interface to Speaker).3. Signal: Transmits Balanced Mono. Not a stereo splitter.
Photos
Product specs
| Specification | Details |
|---|---|
| Connector Type | 6.35mm Trs to Xlr Male, 3-pin |
| Cable Type | XLR |
| Compatible Devices | Destination Devices: Powered Studio Monitors, PA Speakers, Active Stage Monitors, Source Devices: Audio Interfaces, DJ Controllers, Mixers, Preamps; See more |
| Other Special Features of the Product | Braided, Balanced, Gold-Plated Connectors, Dual Shielded, Color-Coded, 22 AWG |
| Compatible Phone Models | No Compatible Phone Models |
| Connector Gender | Male-to-Male |
| Number of Pins | 3 |
| Recommended Uses For Product | Home Recording Studio Setup, Live Sound Reinforcement, Connecting Audio Interfaces or Mixers to Powered Studio Monitors and PA Speakers |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Unit Count | 2.0 Count |
| Item Weight | 9.8 Ounces |
| Number of Items | 1 |
| Outer Material | Nylon, Polyvinyl Chloride (PVC) |
| Brand Name | SNANSHI |
| Model Name | trs to xlr |
| Customer Package Type | Standard Packaging |
| Model | xlr to 1/4 |
| Manufacturer | SNANSHI |
| Warranty Description | 3 Year Manufacturer |
| Part Number | 3000142 |
| Included Components | 1/4 to xlr cable 6.6ft 2Pack |
| ASIN | B0GCFX888G |
| Color | Black |
| Item Shape | Round |
| Brand | SNANSHI |
| Special Feature | Braided, Balanced, Gold-Plated Connectors, Dual Shielded, Color-Coded, 22 AWG |
Related
© 2026 GiftsPick.com. All rights reserved. Time Zone: Pacific Time (US & Canada).